We are a small family owned business run by husband and wife John & Jayme Bowman. We supply customers with the Cadillac of Brass, Lake City once-fired 5.56 Military Surplus Brass converted to 300 AAC Blackout Brass. We supply Brass to competition shooters, individuals, as well as business looking to supply their customers with a high quality brass, made by hand not a robotic assembly line.
We offer .223/5.56 to Blackout Conversion Services. We charge $.09 each. They are fully processed (swaged, deprimed, trimmed, and sized, and polished) and we usually have a 2 day turnaround from the day we receive it. We will do any headstamp you like as long as they are boxer primed (TAA,GFL are too thick and do not make good 300 brass, FC military also tends to be thicker depending on your chamber you may need to chamfer the brass, but the commerical FC is ok) All you need to do is mail the brass to us and we take it from there, we bill you based on the finished count when we are done making it, plus shipping back. It's that easy!!!
ALL 300 BLACKOUT BRASS IS PROCESSED AS FOLLOWS:
Deprimed- Dillon Universal Depriming Die
Trimmed- Dillon RT1200. All cases have been trimmed to no longer than 1.355 +/- .005 to fall within SAAMI specs, which will allow you to reload several times before trimming.
Sized- Forster Bench Rest 300 AAC Blackout Die
Swaged- Dillon 1050Polished- Polished in Stainless Steel media for a beautiful shine inside and out.
Extra Touches- Case neck and overall dimensions checked throughout processing with a Sheridan Engineering Gauge to ensure that the cases function in even the tightest SAAMI chambers, and we use digital calipers to ensure a consistent length of 1.355 +/- .005 We also batch check cases with a Swage Gauge to make sure they are not over or under swaged.
ALL 5.56/.223 BRASS IS PROCESSED AS FOLLOWS:
Deprimed - Dillon Universal Depriming Die
Trimmed - Dillon RT1200. All cases have been trimmed to no longer than 1.750 +/- .005 to fall within SAAMI specs, which will allow you to reload several times before trimming.
Sized - Dillon .223 Carbide Sizing Die
Swaged - Dillon 1050 Primer pockets batch checked with Primer Pocket gauge during processing
as well. They are slightly tighter than commercial .223 but will give
longer life before pocket becomes loose.We also check the case neck/shoulder dimensions and overall dimensions
through processing with a Wilson Case Length Gauge.