This is for all NICKEL 300 AAC Blackout Brass. As the nickel brass is a hair thicker than our normal Lake City brass, you may want to chamfer the primer pockets depending on the priming system you are using. They have however already been swaged. Headstamps are majority if not all FC .223 Premium Brass. It comes from Police Range Duty Ammo!
**These are available in very LIMITED quantities, and not something we can constantly keep in stock due to the low availablity of quality nickel brass, so pick yours up now while they are here!
ONLY 4 LOTS AVAILABLE
ALL 300 BLACKOUT BRASS IS PROCESSED AS FOLLOWS:
Deprimed- Dillon Universal Depriming Die
Trimmed- Dillon RT1500. All cases have been trimmed to within SAAMI min/max specs.
Sized- Forster Bench Rest 300 AAC Blackout Die
Swaged- Dillon 1050 (swage is kept on the tigher side so you don't have loose primer pockets)
Polished- Polished in Stainless Steel media for a beautiful shine inside and out.
The brass is ran by hand through our DIllon's we do not automate production, we run it and we check it as it is made to ensure quality.
Case neck and overall dimensions checked throughout processing with a Sheridan Engineering Gauge to ensure that the cases function in even the tightest SAAMI chambers, and we use digital calipers to ensure a consistent length of 1.355 +/- .005 We also batch check cases with a Swage Gauge to make sure they are not over or under swaged.